| |
|
| |
|
|
Automation, Motion Control Motor, Drives & Cables TRM Can supply.
|
Newsflash
TRM are soon to launch a new product range in the Multi-Axis Digital Reader Out (DRO) market. These will be 2, 3 and 4 axis readouts with math capabilities. |
|
| |
| |
|
| |
|
|
|
CM2 & CM3 Pin Out List. | Controller Connector - 9 Way Female D Type | | Pin Number | Label | Description | | 1 | A | RS485 | | 2 | RX | RS232 | | 3 | TX | RS232 | | 4 | Z | RS485 | | 5 | GND | GROUND (0V) | | 6 | Y | RS485 | | 7 | RTS | RS232 | | 8 | CTS | RS232 | | 9 | B | RS485 | | Controller Connector - 44 Way Male D Type | | Pin Number | Label | Description | | 1 | CHA0 | Encoder Channel 0 - 'A' Signal | | 2 | CHB0 | Encoder Channel 0 - 'B' Signal | | 3 | Z0 | Encoder Channel 0 Z pulse | | 4 | CHA1 | Encoder Channel 1 - 'A' Signal | | 5 | CHB1 | Encoder Channel 1 - 'B' Signal | | 6 | Z1 | Encoder Channel 1 Z pulse | | 7 | CHA2 | Encoder Channel 2 - 'A' Signal | | 8 | CHB2 | Encoder Channel 2- 'B' Signal | | 9 | Z2 | Encoder Channel 2 Z pulse | | 10 | n/c | - | | 11 | n/c | - | | 12 | n/c | - | | 13 | STP0 | Stepper Axis 0 Command | | 14 | STP2 | Stepper Axis 2 Command | | 15 | GND | Ground (0V) | | 16 | 5V | Encoder Supply (5 Volt output) | | 17 | CHA0N | Encoder channel 0 - 'A\' Signal | | 18 | CHB0N | Encoder channel 0 - 'B\' Signal | | 19 | GND | Ground (0V) | | 20 | CHA1N | Encoder channel 1 - 'A\' Signal | | 21 | CHB1N | Encoder channel 1 - 'B\' Signal | | 22 | 5V | Encoder Supply (5 Volt output) | | 23 | CHA2N | Encoder channel 2 - 'A\' Signal | | 24 | CHB2N | Encoder channel 2 - 'B\' Signal | | 25 | GND | Ground (0V) | | 26 | n/c | - | | 27 | n/c | - | | 28 | GND | Ground (0V) | | 29 | STP1 | Stepper Axis 1 Step | | 30 | SP0 | General output 0 | | 31 | MC0 | Motor Command O/P 0 | | 32 | MC1 | Motor Command O/P 1 | | 33 | MC2 | Motor Command O/P 2 | | 34 | MC3 | Motor Command O/P 3 | | 35 | VIN | Analogue Input (optional) | | 36 | n/c | - | | 37 | n/c | - | | 38 | n/c | - | | 39 | DIR0 | Stepper Axis 0 Direction | | 40 | DIR1 | Stepper Axis 1 Direction | | 41 | DIR2 | Stepper Axis 2 Direction | | 42 | SP1 | General output 1 | | 43 | n/c | - | | 44 | n/c | - | | Controller Connector - 37 Way Male D Type | | Pin Number | Label | Description | | 1 | GND | 24 Volt Supply Ground (0V) | | 2 | +24V | 24 Volt Supply | | 3 | DRV0 | Driver Output 0 | | 4 | DRV1 | Driver Output 1 | | 5 | DRV2 | Driver Output 2 | | 6 | DRV3 | Driver Output 3 | | 7 | DRV4 | Driver Output 4 | | 8 | DRV6 | Driver Output 6 | | 9 | SOLCOM | Protection Diode Common | | 10 | DRV GND | Driver Ground | | 11 | OP/E | Amplifier Enable Emitter | | 12 | IP1 | Digital Input 1 | | 13 | IP3 | Digital Input | | 14 | IP5 | Digital Input | | 15 | IP7 | Digital Input | | 16 | IP9 | Digital Input | | 17 | IP11 | Digital Input | | 18 | IP13 | Digital Input | | 19 | IP15 | Digital Input | | 20 | GND | 24 Volt Supply Ground | | 21 | +24V | 24 Volt Supply | | 22 | DRV0 | Driver Output 0 | | 23 | DRV1 | Driver Output 1 | | 24 | DRV2 | Driver Output 2 | | 25 | DRV3 | Driver Output 3 | | 26 | DRV5 | Driver Output 5 | | 27 | DRV7 | Driver Output 7 | | 28 | DRV GND | Driver Ground | | 29 | OP/C | Amplifier Enable Collector | | 30 | IP0 | Digital Input 0 | | 31 | IP2 | Digital Input 2 | | 32 | IP4 | Digital Input 4 | | 33 | IP6 | Digital Input 6 | | 34 | IP8 | Digital Input 8 | | 35 | IP10 | Digital Input 10 | | 36 | IP12 | Digital Input 12 | | 37 | IP14 | Digital Input 14 |
|
|
|
© 2010 Automation, Motion Control Motor, Drives & Cables TRM Can supply.
Joomla! is Free Software released under the GNU/GPL License.
Company Number 3263617
Template Design by funky-visions.de
|
|
|