|
Our Motion Application Programe or "MAP" is designed to control single or multiple axis and with PLC capabilities is the best solution at the best price for a wide variety of machinery. Since MAP is available for all of TRM's control systems there is no need to pay extra costs for software.
MAP allows the user to program the controller to suit the machine and componet or sequence being run.
Please also see our case studies section for examples of machines using this software.
|
|
|
|
|
|
Advantages:
- Easy to install and use
- Rapid program development
- Save money in software development
- Easy to adapt to different machines
- User friendly interface
- Simplified instruction set
- Memory for 100 different programs up 1000 lines each
- Control of DC and AC servo motors and stepper motors
|
Motion control
- Linear interpolation
- Circular interpolation
- Backlash compensation
- G-code interpreter
- Home routines
- Interrupts
- Flexible I/O programing
- Up o 40 commands
|
|
|
 |
|
 |
|
 |
|
MAP welcome screen with icons for run menu, edit menu, technical menu and languages.
|
|
Edit screen with a short program example. User can make complex programs with over 50 MAP instructions available.
|
|
In calibration menu the user sets parameters for each axis, these are the speed of the motors used, encoder, maximum limits etc. |
|
|
|
|
|
 |
|
 |
|
 |
|
In the memory menu the user can save, delete and open MAP programs.
|
|
The user can select the language between English and Spanish more languages are available on requests |
|
The operator screen is configurable and user can display the parameters required for a particular machine. |
|
|
As a recent update to the MAP software, G code has now been incorporated as standard.
This now allows the user to take data from CAD files, which, once downloaded to the controller, can then just be run. A good source of information on G-Code commands can be found here. This is of special interest for the operator and manufacturer of CNC machines. Using a third party program to convert CAD files into a G-code program and loading it to the TRM motion controller using a USB pen drive is an easy and economic way to manufacture 2D and 3D objects. Mainly used for CNC routers, CNC plasma cutting machines, wood working machines and milling machines, the TRM G-code module coupled with MAP and our motion controllers like the SMC, give extremely good value for money.
|
|
Run screen
|
|
Brochure
|
|
Supported G-code commands
- Fnn Feed Rate.
- G0 Rapid position.
- G1 Linear interpolation.
- G2 Clockwise circular interpolation.
- G3 Counter clockwise circular interpolation.
- G17 Set planes XY.
- G18 Set planes XZ.
- G19 Set planes YZ.
- G20 Set to Inches.
- G21 Set to MM.
- M0 End of G-code.
|
- M3 Spindle on clockwise.
- M4 Spindle on counter clockwise.
- M5 Stop Spindle.
- M6 Auto tool change.
- Pnn Dwell time.
- Snn Spindle speed.
- Tnn Tool select.
- Xnn Set X position.
- Ynn Set Y position.
- Znn Set Z position.
|
|
|
MAP